武漢中創聯達科技有限公司

Invisible®Vision Super-UVi (SUVi)系列專利相機增強器，專為嚴格的科學應用而設計。它們提供了一個無與倫比的分辨率超過75 lp/mm，加上極高的輸出功率/壽命以及線性信號放大的數據獲取。容易同步和光學透鏡耦合到一個高速攝像機，每個視頻幀可以編程門控從50ns和以上在10ns步驟，重復率高達1MHz。可用S20或S25光電陰極,獨特的專利系統提供深紫外至可見光響應范圍(200 - 900 nm)和適度的系統增益P46(綠色)快速衰減輸出熒光材料,也可以通過耦合的前端MCP增強器(線性減少& MTF /分辨率)達到更高的增益或速度控制。

典型的應用有：PIV流體動力學，燃燒研究，放電，生物醫學和彈道學以及許多其他高速和超高速宏觀成像要求。SUVi易于編程，通過其集成菜單驅動的液晶顯示/控制面板或通過其USB接口和軟件同步外部TTL或視頻信號;提供多個可編程曝光和延遲從30ns在重復頻率高達1MHz和超過100幀突發觸發模式。先進的功能，如用戶可編程輸出快門監視器和一個獨立的輸出頻閃儀用于系統的補充。

特點：

·從紫外到近紅外的光譜響應范圍，高速快門時間可達10納秒

·高增益以及高靈敏度

·幀率超過1,000,000fps (HSV)

·在burst模式下，幀率可達20,000,000fps

·完善的控制面板以及USB外部控制

·獨特的分辨率> 75lp/mm (25mm直徑輸出口）

·光電陰極：S20（偏重于紫外，從紫外到可見光）或者S25（偏向于可見光，從紫外到近紅外）

·磷光體：P46（衰減時間通常小于1微秒）

SUVI 25 Series Camera Instensifier

Intensifier
Input Window	Quartz.
Photocathode	S20 / S25, 200nm to > 850nm (UV to NIR).
Output Window	Glass.
Phosphor	P46 (Green) - decay < typically 1μs.
Luminance Gain	> 400,000 (Limit set by software only)
Output Diameter	25mm (alternative 18mm format also available.
Gating	50ns Minimum (standard unit). 30ns absolute minimum.
Resolution	75 + lp/mm.
Optics
Input	F – mount.
Internal	Integral f/1.2 lens system.
External	Mated f/1.4 lens.
Output Image Format	Maximum usable diameter 25mm.
System	All electronics/controls included within unit. Menu driven LCD control panel / indicators. USB port and graphical user interface s/w. Crystal controlled timing accuracy.
Exposures	50ns to > 1ms in 10ns steps (will allow faster gating)
Delays	50ns > 10ms in 10ns steps.
Burst mode / Multiple Exposure	Up to 100 consecutive programmed delays/exposures per input trigger
Triggering	TTL Positive, TTL Negative. Make / Break (self powered). Composite video frame / field synchronization.
Outputs	User Programmable TTL shutter monitor. User Programmable TTL ‘strobe’ output.
System Photon Gain	Combination of relay optics and intensifier. > 10.Automatic over-brightness (user controlled).
Environmental
Dimensions (approximate)	285 x 168 x 230mm - including output lens & handle.
Weight	11 Kg.
Power	150W (90-264VAC).
Temperature	0℃ to 40℃, non-condensing humidity.
Construction	Aluminium housing.
Mounting	3/8-20 UNC thread on base.
Packaging	Flight box.
Documentation and Software	Supplied on CD.